COOLER MASTER HAF 700 ARGB (E-ATX) FULL TOWER CABINET (TITANIUM GREY)
- Unparalleled Hardware & Cooling Capabilities
- Mammoth Water Cooling Support
- Exclusive Tool-Less Technology
- ARGB Gen2 ready with MasterPlus+ integration
- In Spirit of Cooler Master’s HAF Legacy
HAF 700 embodies the spirit of HAF’s performance-oriented design, boasting attention to mechanical detail.
The HAF 700 is capable of housing up to SSI-EEB motherboards (E-ATX), as well as any sized graphics cards in BOTH horizontal and vertical orientations.
The front I/O is designed to maximize the front connectivity for most high-end motherboards, featuring four USB Gen 3.1 Type-A ports, a USB Gen 3.2 Type C, a 4-pin audio/mic headset jack as well as a dedicated mic jack.
Mammoth Radiator Support
- Unparalleled Options for Custom Cooling
- 480mm: Side Panel *1
- 360mm: Front Panel *1 or Bottom Panel *1 / Top Panel *2
- 240mm: Rear Panel *1
- Advanced Mounting Options
The unique removable top panel design allows you to effortlessly install, reach and maintain cooling components such as fans and radiators even in builds with complex custom cooling systems.
This, coupled with the rotatable radiator/fan bracket included out of the box allows for an unparalleled building experience.
Exclusive 200mm SickleFlow ARGB PWM Performance Edition
HAF 700 comes with dual exclusive 200mm Sickleflow ARGB PWM “Performance Edition” fans tailored to strike a balance between performance potential and noise levels.
Integrated 7x PWM & 5x ARGB Hub
This chassis features a fully integrated PWM/ARGB Hub that allows for effortless cable management and control over multiple fans and ARGB devices. The Hub is fully compatible with ARGB Gen2 devices.
ARGB Gen2 Ready, Controller Included
ARGB Gen2 technology allows users to explore full range customization down to the lighting effecting of each individual LED, while remaining compatible with third-party devices.
MasterPlus+ Software Integration
HAF 700 comes equipped with a software suite in MasterPlus+, facilitating user-friendly management and customization of the integrated ARGB Gen2 controller (A1).
The A1 controller plugin will automatically be activated on MasterPlus+ once the controller has been connected to the system.
Unrestricted Front Panel Intake
HAF 700 sports a fully meshed front panel, specifically designed to allow for maximum air intake.
With the front panel structurally reinforced to prevent resonation caused by fan vibrations, systems can run smoothly at minimal noise levels.
HAF 700’s structure segregates non heat sensitive components so heat dissipation can be targeted towards heat-sensitive components at an overall higher efficiency.
Tool-less Vertical GPU Mounting (Patent Pending)
No more fiddling with screws! HAF 700 features a unique clamping mechanism that allows users to install, remove, and upgrade graphics cards without the need to use any tools.
Tool-less PSU Mount
To install PSUs, simply slide the power supply in place and secure it with the two included thumbscrews on the rear end of the case. No tools, no hassle.
Tool-less HDD Cage
The rear chambers include a toolless, swiveling drive cage that allows users to quickly access drives with ease.
Tool-less MultiFunction Brackets
Multifunction, repositionable brackets can be used to mount SSDs, HDDs, or pumps/reservoirs for liquid cooling.
|Materials – Exterior
|Materials – Left Side Panel
|Tempered Glass, Steel, Plastic
|Dimensions (L x W x H)
|556 x 279 x 540 mm (Body Size)
666 x 291 x 626 mm (incl. Protrusions)
|Mini ITX, Micro ATX, ATX, E-ATX, SSI CEB, SSI EEB
|2.5″ / 3.5″ Drive Bays (Combo)
|9 (4 HDD brackets, 5 Screw+Rubber)
|I/O Panel – USB Ports
|1x USB 3.2 Gen 2 Type C
4x USB 3.2 Gen 1 (3.0)
|I/O Panel – Audio In / Out
|1x 3.5mm 4 Poles Audio Jack
1x 3.5mm Mic Jack
|Pre-installed Fans – Front
|2x SickleFlow 200 ARGB PWM
|Pre-installed Fans – Rear
|2x SickleFlow 120 ARGB PWM
|Pre-installed Fans – Bottom
|1x SickleFlow 120 ARGB PWM
|Fan Support – Top
6x 120mm (Remove 480mm bracket)
|Fan Support – Front
|Fan Support – Rear
|Fan Support – Bottom
|Fan Support – Side
|4x 120mm / 3x 140mm
|Radiator Support – Top
|Up to 2x 360mm / 1x 420mm
|Radiator Support – Rear
|Up to 240mm
|Radiator Support – Bottom
|Up to 420/360mm
|Radiator Support – Side
|Up to 480/420/360mm
|Clearance – CPU Cooler
|166mm / 6.53 inch
|Clearance – PSU
|200mm / 7.87 inch
|Clearance – GFX
|490mm / 19.29 inch
|Cable Routing – Behind Motherboard Tray
|1x Rotatable Radiator Bracket
1x LED Controller A1 (ARGB Gen2)
1x ARGB/PWM Hub
|Bottom, Right side
|Power Supply Support
|Bottom Mount, E-ATX